Walking Barefoot..

on the freshly sprung grass in spring time.....

What a wonderful feeling and some of my family members had this pleasure forcibly thrust upon them when I raided their shoe closet - :) for this episode of Tuesday Treats.

It wasn't that bad ...as I just raided their shoe polish , and left them with their shoes. The laces - thought it would be better all around just buying them ..

What did I need all this for??

For one of my purse this week

from Tags Boxes, Bags and More Cartridge - pg 118 button 37 on the overlay.   

Now I did do more than one and a look at all three 

I was cleaning my brown shoes when I thought why not try a Faux leather technique? I am afraid my mind gets only so creative - no feathers and no shakers. Give me metal and power tools LOL. Ok - maybe I concede to a little beads, some bling , maybe a tiny bit of ribbons and of course more tools like heat gun, stamping. After all I am a girl - well when you hear my teenage son say it - a woman...old woman... sigh. How can I make him understand that the female of the species are all forever sixteen???

Well... coming to the purse

Here's how I "dun" it.

Well hope you enjoyed the little bit of comic relief there.

Getting serious

For the brown bag - I took a length of brown book covering paper roll and cut it about 3- 4 inches more than 12 x 24 so making that  16 x 28. You can do this technique with a brown shopping bag too, but as I didn't have any I stuck to this. 

I took the paper and crumpled it.

Now before the next step - I had to make a decision. I knew that because of the crumpling and the air pockets formed it will not cut right in the cricut as the blade will skip over the pockets. So I decided to glue this down to another paper. This would also stabilize the paper as the brown paper is a little thin.  I decided to use the same brown paper . You can cut this paper also 2 inches more than 12 x 24 in case you make a mistake but with this technique it will not matter and as I have a creatopia I just passed it through that. Atg gun will work fine but with that you might want to have the paper wider and longer. Here take care to stick the shiny sides together for 2 reasons

1) polish will take better on the dull (not shiny side)

2) shiny side will not stick on the cricut mat.

so glue the shiny sides together

  

and apply brown (or black) liquid shoe polish.If using the other grab a sponge. I found the liquid easier. You can of course use regular ink but I liked this better for how apt the usage of shoe polish for leather.

wow - look at that - my hands and paper - a perfect camouflage.

So after applying polish which I did on both sides - front and back and allowing it to dry I cut the paper out.

Now a brief look at  my G file.

This is page 1 of my file

I have used the black out feature of pg 118 & welded another shape from pg 112 - a pocket folder or library pocket as I wanted a strap like closure.

 I also used the same shape (blackout) for forming pockets in the purse. I delinked the width and height i.e turned the golden chain off (white) and rotated it to check with the template in previous page. I didn't want the closure to overlap in some places and I did not want the side pockets to be more than the ... ha ha sides.

I then cut page 1 and 2 and scored & glued using ATG gun and little bit of zip dry glue

This has 10 score marks. It needs gluing with ATG or red tape on the outsides except for a couple of spots which can be optionally glue (in the insides). (When you weld sometimes the score marks goes away depending on the purse)

I of course wanted to add the pockets  and the beads which I did before gluing down the sides. I also used opaque markers - Souffle 3d  markers to draw stitch lines & this too before gluing as it is easier to work when it is flat. For the beading I was able to slightly peel apart the layers a little and hide the back of the work which was a huge advantage. I used thin metal wire which went inside a needle. I then later stuck the layers closed with zip dry glue.

 I found it easier to first fold in the half circles and then the glued small tab and then the larger side over it all.

Here's an inside view of the purse and also the handle I made with beads & shoe lace (yep - but you can use the leather strip for this). I attached the round wooden bead to the purse with a handle strap(cut by hand) and brads. Added velcro  for the closure and the bag was done. After finishing sprayed a coat of clear glossy sealer.

The second purse

 can be made with two -  12 x 12 sheets taking care to overlap at the bottom and adjusting the file (page 3) by moving it to the appropriate point point before changing mat size to 12 x 12. I used another 12 x 24 sheet and attached the pattern paper as it was thin. For the window I have used a shape form storybook and made the frame on page 4 (by increasing the image , then delinking the golden chain and adjusting the height and width to form a frame)Here's the file view

I stamped a piece of vellum , colored it and stuck it behind the purse window and added a frame in the front. Some half pearl stickers just peeled and glued and a button with shank cut off and added with glue dots and for the handle - just a bead garland - which my son gave me for Fat Tuesday. I cut it and punched a hole in the sides slipped the beads in and taped it.The metal jewelery glue came in very handy.

Pattern Paper used for both this and the next purse is from Deja' Views Home collection.

I used the file on page 1 and the buckle on page 4 (image on the left) for this purse

I cut the buckle with chipboard, versamarked it completely, applied silver embossing powder and when it was still hot and wet stamped it with a medallion stamp I had  to give it texture. IFor the handle I just took a chain and slipped beads and glued it with Alene metal jewellery glue to keep them in place and attached it to the purse with brads. The purse looked kind of empty  so to embellish I just took strip of black cardstock - used fiskar plates called braid (I call it plait LOL) and then cuttlebugged it (sandwich is - A plate, fiskar plate,the cardstock which needs embossing,  2 embossing rubber mats (or rubber gaskets) and B plate. Then inked with silver ink and glued it in the edges. To the handle I stuck some chain and also glued a silver button (again with shank cut off)

Here are the 3 videos. You can also watch it from the youtube channel - TheBugBytes

 

The gypsy file is available in the file section. Hope you liked the simple project...and get to walk barefoot wherever you are if the weather permits ....